Standard max width:

20’2″ (6147 mm)

Standard max-height

18’1″ (5512 mm)

Section thickness

1 3/4″ (45 mm)

Material

6061-T6 aluminum

Standard finish

204R-1 clear anodized(painted white at no charge)

Center stile width

2 11/16″ (68 mm)

End stile width

3 5/16″ (84 mm)

Top rail width

2 3/8″ (60 mm) or 3 3/4″ (95 mm)

Top intermediate rail width

2 1/8″ (54 mm)

Bottom intermediate rail width

1 19/32″ (40 mm)

Bottom rail width

3 3/4″ (95 mm) or 4 1/2″ (114 mm)

WeatherSeals

Bottom, flexible PVC

Track

3″ (76.2 mm)

Control Panel

Electronic controller with micro-processor self-diagnostics. Digital readout, time delay self-close timer, and the non-resettable cycle counter. The enclosure is IP54 rated (NEMA 3 equivalent)

Mounting

Side mount left or right, vertical only

Operation

Direct drive integrated gear/motor/brake assembly; Drive assembly and limit sensors are factory pre-assembled; Manual hand chain for power outage; Horsepower appropriate to door size/weight; 230V AC 3-phase motor (operating range 208-245V)

Hinges and fixtures

Galvanized steel ​

Rollers

Nylon (Standard)
Steel (Windload)

Actuator

Single open/close/stop push button station incorporated into the control panel ​

Accessories

Cable tension switches LH/RH

Hand chain switch on the motor

Encoder plug-and-play

8-port junction box

Lock:

Galvanized, interior-mounted single unit ​​

Wind load options available

Lock: Interior galvanized single unit with interlock

Finish options:

• Bronze anodization
• Anodized or Painted
• PowderGuard® Premium powder coat and PowderGuard® Max hardened powder coat available in approximately 200 colors as well as color-matching to specification
• PowderGuard® Textured Finish: Industrial textured powder coat provides a thicker, more scratch-resistant coat for added product protection on guides, bottom bar, and head plate
• the end

Operation options:

• 208 volts, single phase, 60 Hz (190-207V range)
• 208 volts, three-phase, 60 Hz (190-207V range)
• 230 volts, single phase, 60 Hz (208-245V range)
• 230 volts, three-phase, 60 Hz (208-245V range)
• 460 volts, three-phase, 60 Hz (456-495V range)
• 575 volts, three-phase, 60 Hz (517-632V range)

Accessory Options

• Receivers/transmitters/Radio control
• Loop detectors/motion detectors
• Additional push button station/Treadle switch/Horn/Strobe
• Key switch/Traffic light/Warning light/LED system break
• Cover/Gearbox heater/Transformer 9KVA
• Coil-cord kit/Hand chain extension/Hoist switch extension
• Photo-eye

Window Glazing Options:

• 1⁄8″ (3 mm) DSB
• 1⁄8″ (3 mm) or 1⁄4″ (6 mm) acrylic
• 1⁄8″ (3 mm) or 1⁄4″ (6 mm) tempered
• 1⁄8″ (3 mm) or 1⁄4″ (6 mm) clear polycarbonate
• 1/4″ (6 mm) and 3/8″ (10 mm) twin-wall polycarbonate. 5/8″ triple-wall polycarbonate
• 1⁄4″ (6 mm) 3/8″ (10mm), and 5/8″ (16mm) twin-wall polycarbonate, triple-wall polycarbonate 1/4″ (6mm) wire glass
• 1⁄2″ (12 mm) insulated glass

Color Options:

Anodized Finishes

A clear anodized finish comes standard. Black, Light, Medium, and Dark Bronze anodized finishes are also available.

Clear (standard)

Light Bronze

Medium Bronze

Dark Bronze

Select from approximately 200 powder coat color options to best match your home. Actual door color may vary slightly from the digital representation above. Color samples are available by request

Glass Options:

Various glass options are available, including clear, obscure, and satin.

Satin

Obscure

Bronze Tint

Gray Tint

Green Tint

Double Strength
DBS* (Standard)

impact Frosted
Polycarbonate

Specialty Glass:

• Laminated White – privacy
• Low E Glass* – thermal efficiency
• Tempered Glass – enhanced safety
• Tinted Glass* – color options: Green, Grey, Bronze

Glass Alternatives:

• Cl ear Lexan® Polycarbonate* – shatter-resistant
• Multi-Wall Polycarbonate – superior strength with UV protection; color options: Clear, White, Bronze
• Plexiglas® Acrylic* – shatter resistant
• Impact Clear and Frosted Polycarbonate – 0.250″ minimum

Brochure, Owner’s Manual & Specs: